What Does Remanufactured Mean? VS Refurbished, Rebuilt, Reconditioned

Outline:

  • Introduction
  • Similarities
  • Differences
  • Rebuilt Vs. Remanufacture
  • Recondition Vs. Remanufacture
  • Refurbished Vs. Remanufacture
  • Remanufactured
  • How Products are Remanufactured?
  • Is Remanufactured as Good as New?
  • What are the Benefits of a Remanufactured Product?
  • How Much Can Remanufacturing Cost?
  • Conclusion

Introduction

Is a part of your vehicle damaged? Are you looking to replace it? If yes, you may find services such as remanufacturing, reconditioning, rebuilding, and refurbishing. All these terms can sound similar, yet they have major differences. For a good decision for your vehicle, you need to understand what these terms mean.

Let us look into what all these terms mean and what are the key similarities and differences among them.

Similarities

Rebuilt, remanufactured, refurbished, and reconditioned fall under the same broad category. It is a product recovery process. Damaged or old materials are often dumped. These terms are concerned with restoring the capacity of such materials. All the concepts have numerous environmental and economic benefits, yet the one you choose affects the durability of your automobiles.

Differences

Remanufactured, rebuilt, refurbished, and reconditioned are all different services. Their key purpose is the same, to restore a product. However, the process followed for restoration varies among all these procedures. Here is a comparison of these techniques for your understanding;

Rebuilt Vs. Remanufacture

Rebuilding starts with product cleanliness and inspection. All the parts that are damaged are removed, and replaced with new ones. The parts which are not worn out will stay as they are. They should fall under acceptable product limits by the manufacturer. It will restore the functionality of the product, yet remanufacturing is better than rebuilding. It is because in remanufacturing all parts of the product are bought back to manufacturers’ standards.

Recondition Vs. Remanufacture

This process is very much similar to remanufacturing. If your material is reconditioned, all the worn-out parts are made to run better. However, you will not get the original warranty of the products as in the remanufacturing process. In remanufacturing, the material is brought back to its original standards. Hence, the product warranty remains valid.

Refurbished Vs. Remanufacture

Another term used interchangeably with remanufactured is refurbished. However, both of these differ. The major difference is the extent of restoration. Refurbished products have their damaged parts removed only, while remanufactured products have all the parts restored. Remanufacturing is a more skilled and cautious princess, that guarantees a better product than sole refurbishing. In both cases, the product has its ability restored.

Remanufactured

Remanufacturing has been a burning question in recent years. It is a process of restoring the abilities of a worn-out product. Products that are up for sale or dumped can be recovered through this procedure. You will get the product back in a new-like condition. The process followed is complex. It meets all the industrial requirements and specifications for remanufacturing products. It undergoes quality and testing standards before being released. You will get a new product that fulfills the warranty requirements.

How Products are Remanufactured?

Our products are remanufactured to meet the set standards of the original product. We begin with the thorough inspection of the products, to determine their condition. Reassembling of the products is done. Every part of the product is cleaned and checked for its quality. The product is upgraded with skilled industrial engineers. They will bring back the product to its original standard.

We pass them through a series of quality inspection tests, before being sent back to you. We provide warranties to guarantee customer satisfaction. We follow this process on the commitment to quality.

Is Remanufactured as Good as New?

A remanufactured product is not a new product, but it is nothing less than a new product either. They have their capacities restored to their original standard. It can even be better than its original condition. Ifulfillsls the specifications of a warrant. Remanufacturing saves environmental consequences from the dumping of old automobile parts. You can also save money from this!

(Remanufacturing Automotive Body Panels Manufacturers by Kuixing Electronics)

What are the Benefits of a Remanufactured Product?

Remanufacturing automotive parts can have various benefits for you. Here is a brief glimpse of the benefits they offer;

  • You will get the part as it was bought new, at a lesser price.
  • Recycling old automobiles can save the environment.
  • Automotive parts are used again so waste is reduced.
  • Maintain the warranty of your product

How Much Can Remanufacturing Cost?

The cost of remanufacturing your product varies according to various factors. It depends on the part you want to remanufacture, and the condition it is in. However, this price is always lower than the price of the same but new product. It will guarantee the same quality, yet the price is much lower. One thing to consider is that the labor cost of installing the product would remain the same, whether it is a new or a remanufactured product. You can also contact us here for a quote!

Why you should chose Shanghai Kuixing Electronics

Introducing Our Automotive Parts Re-manufacturing Service:

– Our services encompass a diverse range of products, such as turbochargers, power steering units, air conditioning compressors, alternator generators, automotive body panels, lighting, and sensor actuators, spanning 11 major categories and boasting over 1000 product specifications.

– With advancements in technology, our expertise in remanufacturing extends beyond traditional fuel vehicles to include new energy vehicles, all within the scope of our sustainable recycling and economic evaluation system.

– Guided by principles of the circular economy and sustainable development, we operate under the ethos of “recycle – remanufacture – sales,” consistently delivering value to various stakeholders while mitigating pollution stemming from automotive parts.

– We provide value-added services, optimizing residual value disposal through our comprehensive “Recycle-Remanufacture-Sell” business model and offering competitively priced remanufactured products aligned with market standards.

Visit our website to have a look at the wide variety of services offered.

Conclusion

Products that are remanufactured, rebuilt, or reconditioned work at a good rate. They are thoroughly tested for optimal functioning. They are better than purchasing an old product that has not been tested. However, the remanufacturing process exceeds all others. Here, the products are restored to return to the original standards. They are similar to the new ones!

If you are willing to prefer quality, you should choose remanufacturing of your old product. Choose Shanghai Kuixing Electronics to get your damaged automobiles back to their original quality in less time!

External Links:

https://earthshine-group.com/downloads/Norsk_Ombruk_Final.pdf

https://www.nqa.com/en-pk/certification/sectors/automotive

https://webstore.ansi.org/standards/ansi/ansiric0012016

Share it :
Facebook
Twitter
LinkedIn
WhatsApp

Leave a Reply

Your email address will not be published. Required fields are marked *

New Client Offer

China Injection Mold Report

China’s top ten manufacturers of Injection  Mold and the advantages and disadvantages of analysis,you can leave your mail here